1 / 3 pages of 24 recoeds
50 ohm 0-6 GHz
MCX micro miniature connectors provide repeatable performance from DC to 6 GHz. The design of these devices has taken into consideration the need for size reduction, low weight, durability and reliable performance. The MCX devices enable a 30% space reduction over similar SMB/SMC type.
The MCX is available for affixement to industry standard cable and as a printed circuit board device. The “snap-on” connection feature between devices offer the use ease of assembly in dense packaging layouts.
Applications for the MCX are those where size, weight, performance and ease of assembly are the driving considerations to the final design decision. Typically, these includes GPS, wireless communications (WLAN and mobile) and automotive.
Electrical:
| Impedance | 50 ohm |
| Frequency Range | 0 to 6.0 GHz |
| VSWR | 0-2 GHz: 1.22 max (straight) : 1.50 max (right Angle) 2-6 GHz: 1.35 max (straight) : 1.63 max (right Angle) |
| Dielectric Withstanding Voltage | RG 174, 188, 316: 750 volts rms max RG 178, 196: 500 volts rms max |
| Contact Resistance | center contact: 5.0 milliohms max outer contact: 2.5 milliohms max |
| RF Leakage | -60 dB min |
| Insertion Loss | 0.4 dB max (straight) 0.6 dB max (right Angle) |
| Insulation Resistance | 1,000 megohms min |
Mechanical and Environmental:
| Mating | “push-pull” snap-on coupling |
| Durability | 500 matings |
| Cable Retention | RG174, 188, 316: 20 lbs min |
| Temperature Range | -65¢J to 165¢J |
| Vibration | MIL-STD-202 Method 204 Test Cond. B |
| Salt Spray | MIL-STD-202 Method 101 Test Cond. B |
| Temperature Cycling | MIL-STD-1344 Method 1003 Test Cond. A |
Material:
| | Material | Plating |
| Connector Body | Brass | Nickel or Gold |
| Center Contact | Male: Brass Female: Beryllium Copper | Gold |
| Insulation | Teflon | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
