1 / 2 pages of 18 recoeds
Reverse Polarity non-standard interface connectors are designed for spread spectrum wireless applications where part 15.203 of U.S. FCC regulations are applicable. The reverse polarity design prevents damage and will not matte with standard interface devices if accidentally connected. SMA, BNC, and TNC devices are readily available. Standard cable effacement sizes are available with special or custom design inquiries accepted.
Electrical:
| Impedance | BNC: 50 ohm TNC: 50 ohm |
| Frequency Range | BNC: 0 to 4.0 GHz TNC: 0 to 11 GHz |
| VSWR | 1.3 max |
| Voltage Rating | 500 volts rms max |
| Dielectric Withstanding Voltage | 1,500 volts rms max |
| Insertion Loss | 0.2 dB max @ 3 GHz |
| Insulation Resistance | 5,000 megohms min |
Mechanical and Environmental:
| Mating | BNC: Two study bayonet coupling TNC: 7/16”-28 thread coupling |
| Durability | 500 matings |
| Coupling Nut Retention | 100 lbs min |
| Cable Retention | RG58, 141, 142, 223: 40 lbs min RG59, 62A, 210: 40 lbs min RG174, 188, 316: 20 lbs min |
| Temperature Range | -55¢J to 85¢J |
Material:
| | Material | Plating |
| Connector Body | Brass | Nickel or Gold |
| Center Contact | Male: Brass Female: Brass or Phosphor Bronze | Gold Gold |
| Insulation | Teflon | None |
| Gasket | Silicone Rubber, Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
